Wireless humidity temperature sensor pure white glossy for single mounting 84 x 84 x 17 mm or mounting into the E-Design65 switching system. With battery (lifetime 5 years). Smart Home sensor.
The wireless humidity/temperature sensor measures constantly the relative humidity between 0 and 100% (±5%) and the temperature between -20 and +60°C (±0.5°C).
It sends a data telegram within 2 minutes if changed in the Eltako building radio. If there is no change, a status telegram is sent every 10 minutes.
According to the operating instructions this interval can be reduced to 1 resp. 5 minutes by changing the position of the jumper. Evaluation by actuator F2L14, the Smart Home central units MiniSafe, MiniSafe REG, Safe IV, Touch IV etc. with the Eltako Wireless Building app GFA4.
We recommend stainless-steel countersunk screws 2.9 x 25 mm, DIN 7982 C, for screw connections. Both with rawl plugs 5 x 25 mm and with 55 mm switch boxes. Set of 2 stainless-steel countersunk screws 2,9 x 25 mm and plugs 5 x 25 mm are enclosed.