Wireless temperature controller with hand wheel pure white glossy for single mounting 84 x 84 x 27 mm or mounting into the E-Design65 switching system. With battery (lifetime 4 years). Smart Home sensor.
The temperature controller can be taught-in into the relay actuator TF61R or the heating cooling actuator FHK and into the GFVS software. At a setpoint or current temperature change from min. 0,15°C, the temperature controller sends a wireless telegram within 60 seconds.
If there is no change, a status message is sent every 5 minutes. A jumper defines the function mode. In the TF61 operating mode, only ON or OFF are sent, depending on the difference between setpoint and actual temperature. Measurement accuracy is approx. 1°C.
The setpoint temperature is set with the hand wheel from 12°C to 28°C.
In the frost protection position, the set temperature is 8°C (frost protection).
We recommend stainless-steel countersunk 2.9 x 25 mm, DIN 7982 C, for screw connections. Both with rawl plugs 5 x 25 mm and with 55 mm switch boxes. Set of 2 stainless-steel countersunk screws 2,9 x 25 mm and plugs 5 x 25 mm are enclosed.