FTR55SB-wg Wireless temperature controller with hand wheel, 2 solar cells and battery

Wireless temperature controller pure white glossy for single mounting 80 x 80 x 27 mm or mounting into the E-Design55 switching system. With solar cells and battery (lifetime ­5 years). Smart Home sensor.

The temperature controller can be taught-in into the relay actuator TF61R or the heating cooling ­actuator FHK and into the GFVS software. At a setpoint or current temperature change from min. 0,15°C, the temperature controller sends a wireless telegram within 60 seconds.
If there is no change, a status message is sent every 5 minutes. A jumper defines the function mode. In the TF61 operating mode, only ON or OFF are sent, ­depending on the difference between setpoint and actual temperature. Measurement accuracy is approx. 1°C.
The day reference temperature that ranges from +12°C to +28°C is changed using the hand wheel.
In the position frost protection the temperature control is off and the frost protection function activated. We recommend stainless-steel countersunk 2.9 x 25 mm, DIN 7982 C, for screw ­connections. Both with rawl plugs 5 x 25 mm and with 55 mm switch boxes. Set of 2 stainless-steel counter­sunk screws 2,9 x 25 mm and plugs 5 x 25 mm are enclosed.

EAN 4010312321065